Why you should install
Smart Road control system?

Control devices

Controlling lighting, parking heater, refrigerator, water pump, converter, fan or other devices. Support for 10 circuits.

Sensor monitoring

Connect the sensors you need. Support for popular motion, gas, flood, rain, door or window opening sensors, etc.

Create own rules

Adjust the system to your needs thanks to your own behavioral rules. Simple configuration thanks to built-in rules.

Tank level monitoring

Liquid level monitoring of two tanks. Support for various types of sensors and irregularly shaped tanks.

Battery monitoring

Reading the voltage and charge level of two batteries. Support for batteries (WET/GEL/AGM/LiFePo4).

Weather station

Temperature and humidity reading. Intelligent fan or heating control. Warning of an approaching storm.

Additional temperature probes

Monitor the temperature wherever you want - outside/heating or air conditioning vents or water in tanks.

GSM control

Remote control and notifications via SMS messages via the built-in GSM module.

LED dimmer

Built-in LED dimmer for smooth control of lighting intensity. Support for 10 independent circuits.

MPPT support

Integration with popular MPPT controllers. View parameters and statistics of energy consumption/production. Controlling devices based on read parameters.

Built-in accelerometer

Automatic driving detection and turning off unnecessary devices. The digital level makes parking easier so that you always wake up well rested.

Checklist

No more missing levelers, driving with open roof windows and similar problems. Sound notification when you start driving unprepared.

Easy installation

Special connectors make installation easier and do not require special tools. Good instructions and video tutorials make installation easy and pleasant.

Cooperation with electroblocks

Possibility of easy connection to most electroblocks. However, the electroblock is not required to install the device.

Air conditioning control

Connecting an infrared transmitter allows you to control popular air conditioners from the application level.

Energy saving

Advanced solutions and the lack of relays make the product have very low energy consumption. Special standby mode when the motorhome is winterized.

Flexible

The most flexible solution on the market. You decide what sensors and system behavior you need. You are not stuck with solutions from one manufacturer.

Dedicated to campers

Well-thought-out functionalities tested in practice by people who spend several months a year in a camper.

Affordable

Excellent price-quality ratio - much cheaper than competitive products and, also it allows the use of much cheaper sensors.

No additional fees

You pay once and use it all the time. No additional fees for activating functions in the application.

Safe to use

Numerous protections protect against incorrect connection and short circuit.

Smart Road camper control panel on wall mount tablet

Built-in
motorhome action rules

Burglar alarm

Notifying the user of a burglary and turning on the alarm siren and lighting to scare away the thief.

Motorhome lift alarm

The user will be informed about an attempt to tilt the campervan when he is outside it, which protects against theft of the entire camper or its components such as wheels or catalytic converter.

Battery overcharging

If the battery voltage is too high, the system will inform the user and turn off all devices to prevent damage.

Battery level too low

If the battery voltage is too low, the system will inform the user and turn off all devices to prevent permanent damage to the battery.

Clean water tank reserve

The rule protects against unforeseen use of the entire water supply. The system informs the user when the water is running low, the water pump is turned off, which forces conscious reserve activation.

Notification about fresh water freezing

Warning the user about the risk of freezing of the clean water tank. Optionally, the system can turn on the heating.

Checklist verification

The system will inform you with a sound signal and a notification when it detects camper movement, and on the checklist there are activities that were to be done before departure but have not been checked, e.g. closing the roof windows.

Driving detection

If motorhome movement is detected, the system will automatically turn off devices that should not operate while driving.

Grey water freezing notification

Warning the user of the risk of the grey water tank freezing. Optionally, the system can turn on the tank heating or open the drain valve.

Full grey water tank

Notifying the user about the event and eliminating the risk of overflow by turning off the water pump.

Storm alert

It allows you to notify about an approaching storm, which allows you to hide the awning/chairs in time and close the roof windows to avoid damage.

Gas leak

If information is received from the gas sensor that a leak has been detected, the device will inform the user and the electrical devices will be turned off to reduce the risk of explosion.

Automatic night light

During night hours, the dimmed light will be turned on automatically for 3 minutes after detecting movement inside campervan.

Automatic water pump

The rule for motorhomes or caravans equipped with a pressurized water pump turns the water pump on for 3 minutes when motion is detected inside the vehicle. The solution protects against flooding and ensures comfort of use.

Humidity in the camper is too high

When the humidity is too high, the roof fan will be turned on to dry the interior of the camper/caravan and avoid the accumulation of moisture and mold.

Motorhome flooding

If the device receives information from the flood sensor about a water leak, it will inform the user and turn off the water pump.

Using extra energy

It allows you to use excess energy when the battery is almost full and will not be able to absorb excess energy from the panels. The energy can be used to heat water or charge the battery of an electric bike.

Own rules

Possibility to create your own rules depending on your individual needs.

Comfort you deserve with our Smart Road solution

SmartRoad
device interfaces

#	Interface	Description
1	10x Device control	Used for control most of onboard 12V devices
2	2x Battery voltage	Measurement of hotel and engine battery voltage
3	2x Tank level	Measurement of two tank levels for (fresh/grey/black) water
4	4x External sensor	By default used for move/gas/flood/engine started sensors. Optionally can be used for external switches or door/window sensor or simple tank level sensors as well.
5	MPPT socket	Used for communication with MPPT charge controller
6	SIM card	Slot for SIM card used for SMS based control
7	4x External temperature sensor	Support for up to 4 external temperature sensors
8	SMA socket for WIFI antenna	Allow to replace build-in antenna with external one
9	SMA socket for GSM antenna	Allow to replace build-in antenna with external one
10	Build-in buzzer	Sound notifications
11	Build-in accelerometer	Motorhome/caravan move detection, tilt measurement for parking aid, leveling alarm
12	Build-in humidity sensor	Measure interior humidity, can be used for automatic fan/heating control
13	Build-in temperature sensor	Measure interior temperature, used for device control in thermostate mode
14	Build-in pressure sensor	Storm alert function, show approximate altitude
15	Optional IR sensor	Aircondition control (occupy 1 device control socket)

Meet us
Camper Caravan Show 2024

Co mówią
nasi klienci?

Attractive offer

"The system is more extensive than competitive products and at the same time much cheaper. However, despite the multitude of options, it is easy to use."

Flexible configuration

"Flexibility is the best advantage of this device. Even in my DIY campervan with a lot of custom solutions I was able to adjust configuration so it met my needs."